Order by 11:00 and it rides today's truck · Fresno & Clovis dailyCounter open · 5889 E Clinton AveTeam login
MARCOINDUSTRY SUPPLIES · FRESNO

Pressure washing supplies in Fresno, from hose to degreaser

This is the consumables and parts side of pressure washing: hose, tips, lances, a trigger gun, and the soaps that do the real cleaning. We do not sell the machines, so this page is for the crew that already has one and keeps it working.

Pressure washing supplies on the shelves at MarCo Industry Supplies in Fresno

On the shelf for this work

The whole aisle

What we carry, and what we do not

Start with the plain part. MarCo does not sell pressure washers and we do not sell surface cleaners. If you are shopping for a machine, a dealer is the right stop. What the Pressure aisle holds is everything you burn through or replace on a machine you already own: high-pressure hose in cut lengths, tips and nozzles, V-jets, stainless lances, a trigger gun, a turbo nozzle, and the cleaners that go in front of the water.

The chemistry side is a short, honest list. There is a truck wash and a wash-and-wax, a concrete maintenance cleaner, a rust and oxidation remover, and an EnviroBio degreaser and detergent line. Elsewhere in the shop you will find deck scrub brushes, a concrete and masonry sealer, a mildew stain remover, and squeegees. If a job needs something that is not on the shelf, tell the counter. Special orders can be placed at the counter, and we would rather order the right thing than sell you the wrong one.

Reading a tip: the numbers mean something

A pressure washing tip carries a code, and the code is not decoration. The degrees are the fan angle of the spray. A narrow angle puts all the water on a small spot and hits hard; a wide angle spreads the same water over more area and is gentler on whatever it lands on. The 40-degree tip is the general-purpose rinse for concrete and equipment. The 65-degree is the wide, soft fan, which is the one crews use to pull soap through the system and lay it on a surface.

The other number, the orifice size, is the hole the water has to get through. It is sized to the machine, not to the job. The pump puts out a certain volume in gallons per minute, and the orifice decides how much resistance that volume meets, which sets the pressure at the nozzle. Put a tip with too large an orifice on a machine and the pressure falls, the gauge sags, and the work slows down. Put one that is too small and pressure climbs past what the pump and hose were built for. Match the orifice to your machine’s GPM and PSI rating, read it off the data plate, and bring the numbers when you come in.

We carry brass and stainless tips in the 3.5 and 6.5 orifice sizes, plus V-jet tips for a flat, even fan. Stainless lasts longer on abrasive work and in hard Valley water, which leaves mineral deposits that can wear and crust an orifice over a season. A worn tip is the cheapest fix on the whole machine, and a tip that has opened up from wear is often the reason a washer that used to bite now just rinses.

Hose ratings and why they matter

Hose is where people save a few dollars and lose a few fingers. The rating printed on the hose is a working pressure, and it has to meet or beat what your machine can produce, not what you usually run it at. We stock Continental ContiTech Neptune hose rated to 4,000 PSI in a 3/8 inch size, cut to length from a single foot up to 550 feet, so you can buy the exact run for a trailer reel or a long reach to the back of a lot.

Length costs pressure. Every foot of hose adds friction, and a long run on a small bore hose will leave you with less at the nozzle than the pump is making. For longer runs, think about the GPM you are pushing before you go to the longest reel. Inspect hose before every season and any time it has been run over, kinked, or left coiled in the sun. A bulge, a flattened spot, or a cover worn through to the braid means the hose is done. Do not tape it.

The lances run in 12, 14 and 20 inch stainless, rated to 4,100 PSI. The trigger gun on the shelf is rated for 5,000 PSI at 12 GPM. Check those figures against your machine, and check the fittings, because a gun or lance is only as good as the connection behind it. The parts aisle carries the couplers and fittings.

Degreasers, detergents and concrete

Concrete is porous, and oil gets into it. A degreaser and a detergent are not the same job. A detergent lifts general dirt, tire marks, algae film and food soil. A degreaser is built to break up petroleum and fats so they can be rinsed away. The EnviroBio line is a biological formula, which suits shops that care about what runs down a drain, and it works best when it is given time to dwell. Pressure alone moves oil around. Chemistry plus dwell time plus a rinse gets it out.

The routine for a stained slab is the same whatever the product: sweep, wet the surface, apply the degreaser, let it sit and keep it from drying, agitate with a stiff brush on the bad spots, then rinse. Old stains that have soaked in for years may lighten rather than vanish, and a second pass is normal. The concrete maintenance cleaner is for the regular wash of floors, ramps and walks where the goal is to keep ahead of the grime. If you want the full routine, read the guide on concrete cleaning and oil stains.

After a deep clean, a sealer keeps the next spill from soaking in. The Genlabs concrete and masonry sealer is in the shop for exactly that. Rust stains from rebar, sprinkler heads and bad well water are a Valley classic, and the rust and oxidation remover is the product for those. Read the label and the product page before use, since a rust remover and a degreaser are not meant to be mixed.

Driveways, shop floors and fleets in the Valley

Oil on a Fresno driveway has a pattern. Cars parked in the same spot for years, a leaking truck under a carport, a shop floor where one lift has stood since the nineties. The stain is dark in the center and fades at the edges, and the slab under it is often a gray that has been baked by summers well over a hundred degrees. Fine summer dust and fall burn film settle on top of all of it. A pressure washer with the right tip, a degreaser and patience will clean it. A hot-day mistake is applying degreaser to a slab that is baking in the sun, where it dries before it works. Wash early, or work the shady side first.

Fleet and truck work is its own business here. Dealerships wash inventory constantly in dust season, and the truck wash and wash-and-wax on our shelf are built for painted metal and glass. Produce haulers, ag contractors and delivery fleets need road film, dust and diesel soot off cabs and trailers. Packing houses and dairies wash down floors and equipment on a schedule, and those crews go through hose, tips and detergent faster than almost anyone. For food plants and dairies, check what the plant’s own sanitation program approves before you bring in a product, and ask us for the safety data sheet.

Water rules and doing it clean

The Valley has been through drought years, and cities and water districts here have had watering rules and restrictions on wasteful runoff. The details change by city and by year, so check with your own city or district rather than trusting memory. The general principle holds everywhere: wash water that carries oil, soap or dirt should not run into a storm drain, because storm drains lead to canals and creeks without treatment. Commercial washing often calls for capturing or reclaiming the water. Ask your city what it expects of a mobile wash operator.

Using the right tip helps. A properly sized tip cleans in fewer passes, which means less water on the ground. Letting the degreaser dwell does the same. Neither is a legal safe harbor, but both are good practice.

How MarCo gets it to your job truck

Pressure crews work out of trucks and trailers, and the day does not wait for a supplier. The counter at 5889 East Clinton opens at 8 on weekdays and at 8 on Saturdays until noon, so a tip or a length of hose is a short drive from most Fresno jobs, and you can have it before the first stop if you plan ahead the night before.

If you would rather not drive, the truck runs to Fresno, Clovis, Sanger and Fowler every weekday, and to Selma, Kingsburg, Dinuba, Reedley, Visalia, Tulare and Hanford on Tuesdays and Thursdays, and Madera on Wednesdays. Order by 11 AM for the next route day. Delivery is free over $150 on the route and $15 under. Outside the route, orders ship UPS Ground the same day if placed by 2 PM. Chemicals ship ground only, and some products cannot ship, which the product page tells you. Long hose and big totes over 150 pounds go by LTL on a pallet.

Pressure washing supplies by town

Questions we get at the counter

Do you sell pressure washers?

No. We carry the consumables and parts side only: hose, tips and nozzles, V-jets, lances, a trigger gun, a turbo nozzle, truck wash, concrete cleaner, rust remover and degreaser. If you are buying a machine, go to a dealer, then come to us for what runs through it. Bring your machine’s GPM and PSI and we will help you match parts.

What does the number on a pressure washer tip mean?

The degrees are the fan angle: narrow is harder and more concentrated, wide is gentler and covers more. The orifice number is the size of the opening and has to be matched to your machine’s flow and pressure. The wrong orifice either drops your pressure or pushes it beyond what the equipment is rated for. Check the data plate.

How do I know if a hose is rated for my machine?

Look for the working pressure printed on the hose and make sure it meets or exceeds the maximum your machine can produce, not just what you normally run. Our Neptune hose is a 3/8 inch size rated to 4,000 PSI. Check the machine’s data plate, and replace any hose that is bulged, kinked or worn to the braid.

What is the difference between a degreaser and a detergent?

A detergent lifts general dirt, film and food soil. A degreaser is made to break down oil, fat and petroleum so they rinse away. For oil on concrete you want a degreaser, time to dwell, a brush on the worst spots, and then a rinse. Pressure alone mostly pushes the oil around.

Can I wash a truck or a dealership lot with what you carry?

Yes for the vehicles. We carry a truck wash and a wash-and-wax made for painted metal and glass, and the lot itself is covered by the concrete maintenance cleaner and the degreaser. Keep wash water out of storm drains, and ask your city what it requires of mobile washing.

Can you deliver to a job truck or a site?

Within the twelve route towns, yes: the truck runs Fresno, Clovis, Sanger and Fowler every weekday, and other towns on set days. Order by 11 AM for the next route day. Delivery is free over $150 on the route and $15 under. Outside the route, orders ship UPS Ground, and chemicals ship ground only.

Who buys this from us

  • mobile pressure washing crews
  • auto dealerships and fleet managers
  • produce haulers and ag contractors
  • packing houses and dairies
  • auto and machine shops
  • property managers with parking lots

Read next

Other jobs